One truck that does it all — DR and CR in a single rig. One crew, one mobilization, and you are up and running inside the fence without shutting down your facility.
A single truck carries everything needed for DR and CR — no additional vehicles, no second crew. 10-inch and 17-inch DR flex panels stored and ready, CR plates and back seat scanner on board, isotope secured and compliant.
Everything processes inside the rig. Nothing leaves the site to get developed. NVIsion runs on the monitor from the start, keeping the entire workflow fully digital from exposure to client delivery.
When the geometry doesn’t work for a flex panel, switch to CR — right then. The CR plate goes on in the same setup time. No call back to the office, no waiting on a second crew.
NVIsion switches from DR to CR mode in two clicks — same platform, same workflow. The plate comes off the pipe and goes straight into the back seat scanner. Digitized inside the truck, not sent to a lab. The image is in NVIsion before the next weld starts.
Switch between DR and CR on the spot without leaving the job site. One rig handles both methods, so your crew stays productive and inspections keep pace with the work.
Single truck carries both DR and CR. Certified crew, PPE-ready. No additional vehicles, no second crew, no reconfiguration.
Switch from DR to CR in the same setup — no call back to the office, no waiting on a second crew. NVIsion switches modes in two clicks.
Every rig is equipped with Starlink, so images upload to NVIsion from any job site — same day, every day. No waiting for Wi-Fi or office return.
The 10-inch flex panel wraps directly around the pipe — no rigid frame needed. A small curie source keeps the exposure zone tight, with a barricade of just 10 to 15 feet. Surrounding crew keeps working.
Same process for larger pipe — swap to the 17-inch panel in seconds. Both panels cover the full range of pipe diameters with no reconfiguration of the rig and no additional equipment. Image is instant regardless of pipe size.
CR is not film-based — it is fully digital from the moment it scans. The plate comes off the pipe and goes straight into the back seat scanner inside the truck. Scan progress is visible on screen in real time.
Final image is saved and upload-ready before leaving the job site. Same digital chain as DR — one workflow, both methods. No darkroom, no chemical processing, no courier.
DR handles the long circumferential welds with instant image review. When the crew reaches complex nozzle-to-shell connections, they switch to CR on the spot. Plate scans inside the truck and the image is in NVIsion before the next weld starts. One crew, one deployment, full scope.
Primary scope: DR inspection of a mainline girth weld. Upon excavation, a 2-inch instrument line needs inspection. The technician pulls a CR plate from the truck, completes the shot, scans it in the back seat, and continues DR work. No delay, no second mobilization.
Every CR/DR rig is equipped with a roof-mounted Starlink antenna, providing high-speed satellite internet regardless of job site location. Remote pipeline right-of-ways, offshore staging areas, rural plant sites — connectivity is no longer a limiting factor.
Images upload to NVIsion directly from the rig, same day, every day. No waiting until the crew returns to a facility with Wi-Fi. Every image gets a Level III review before it is released — internal audit trail and approval documentation built in. Nothing goes to the client without being reviewed.
Images upload to NVIsion directly from the rig. Every image gets a Level III review from our team before it is released. Internal audit trail and approval documentation are built in — nothing goes to the client without being reviewed.
Clients log into the portal and download reports and images directly. Same-day access — no film courier, no delays, no waiting. Organized, documented, digital — every job.
Same-day digital delivery. If you want inspection that works around your schedule — not the other way around — this is it.
Contact Us